flexural strength वाक्य
उदाहरण वाक्य
मोबाइल
- These fibers contained about 85 % carbon and had excellent flexural strength.
- In this case, correctly modeling ice's downward flexural strength is most important.
- Increasing the aspect ratio of the fiber usually segments the flexural strength and toughness of the matrix.
- Positive gravity anomalies result from the relatively low flexural strength of the lithosphere during the beginning of rifting.
- But, the binding agents often continue to harden, leading to a loss of flexural strength over time.
- In the case of bridges or offshore structure, compressive strength or upward flexural strength may be of more interest.
- To achieve a ductile behavior of masonry, it is necessary that the shear strength of the wall is greater than the flexural strength.
- While with the decreasing of the Cobalt content, the impact toughness and flexural strength of the cemented carbide drawing die will dramatically decline.
- The strong covalent bonding of this structure results in high flexural strength and resistance to heating and oxidation up to temperatures of about 1600 �C.
- At yield, the maximum stress experienced in the section ( at the furthest points from the neutral axis of the beam ) is defined as the flexural strength.
- UHTCs exhibit high flexural strengths of > 200 MPa at 1800 �C, and UHTCs with fine-grained particles exhibit higher flexural strengths than UHTCs with coarse grains.
- UHTCs exhibit high flexural strengths of > 200 MPa at 1800 �C, and UHTCs with fine-grained particles exhibit higher flexural strengths than UHTCs with coarse grains.
- A number of methods are available for determining the tensile strength of materials, such as the bending flexural test, the biaxial flexural strength test and the weibull approach.
- A second model yielded implications for the superstructure's flexural strength requirements, for connections to the integral abutments, for the two huge abutment walls, and for drilled shafts.
- Most materials fail under tensile stress before they fail under compressive stress, so the maximum tensile stress value that can be sustained before the beam or rod fails is its flexural strength.
- Reinforcing steel bars ( rebar ) are usually placed inside the forms before concrete is poured to give the concrete flexural strength, similar to bridges and high-rise buildings made of reinforced concrete.
- These composites can be made of density from 400 to 1500 kg / m? compressive strength from 1 to 26 MPa, and flexural strength from 0.5 to 4.0 MPa.
- :Designing concrete walls is a heck of a lot more complicated than you have thought, Electron9 . For a start, you need to start with the flexural strength, not the shear strength.
- Some of the property ranges of the composites are density ( 400 1500 kg / m?), compressive strength ( 1 26 MPa ) and flexural strength ( 0.5 4.0 MPa ).
- Portland blast-furnace slag cement has a lighter colour, better concrete workability, easier finishability, higher compressive and flexural strength, lower permeability, improved resistance to aggressive chemicals and more consistent plastic and hardened consistency.
- अधिक वाक्य: 1 2
flexural strength sentences in Hindi. What are the example sentences for flexural strength? flexural strength English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.